Features:
● Using waste heat from refrigeration process as low-temperature reactivation heat source.
● By improving the structure of the rotor, a new type of dehumidification rotor is used to reduce the reactivation temperature, and stable reactivation can be guaranteed at 50~60℃.
10~40%RH
ZCR SERIES DESICCANT DEHUMIDIFIER WITH LOW REACTIVATION TEMPERATURE |
|||||||
Model No. |
Process air volume CMH |
Reactivation air volume CMH |
Process fan motor(kw) |
Reactivation fan motor(kw) |
Hot water heating power for regeneration(kw) |
Hot water at 65°C for regeneration (ton/hour) |
Back-up reactivation heating power(kw) |
ZCR-R20-2000 |
2000 |
2000 |
3 |
1.1 |
20 |
1.7 |
4 |
ZCR-R30-3000 |
3000 |
3000 |
3 |
1.5 |
30 |
2.6 |
6 |
ZCR-R40-4000 |
4000 |
4000 |
4 |
2.2 |
40 |
3.4 |
8 |
ZCR-R50-5000 |
5000 |
5000 |
4 |
2.2 |
50 |
4.3 |
10 |
ZCR-R60-6000 |
6000 |
6000 |
5.5 |
3 |
60 |
5.1 |
12 |
ZCR-R80-8000 |
8000 |
8000 |
7.5 |
4 |
80 |
6.8 |
15 |
ZCR-R100-10000 |
10000 |
10000 |
11 |
5.5 |
100 |
8.5 |
20 |
ZCR-R120-12000 |
12000 |
12000 |
11 |
5.5 |
120 |
10.2 |
24 |
ZCR-R150-15000 |
15000 |
15000 |
15 |
7.5 |
150 |
12.8 |
30 |
ZCR-R200-20000 |
20000 |
20000 |
15 |
11 |
200 |
17 |
40 |
1. The fresh air ratio is 10~30%.
2. The indoor humidity range is 15~50%RH.
3. If there is no hot water, direct expansion refrigeration can be used for the middle surface cooling ; Chilled water system can be used for fresh air surface cooling and rear stage surface cooling and the waste heat form this stage is used for regenerative heating.
ZCR series Desiccant Dehumidifier with low reactivation temperature
ZCR series Desiccant Dehumidifier can dehumidify high relative humidity air with low temperature (60 ℃) regeneration air and achieved greater dehumidification than ZCB-D/Z series with high temperature (120 ℃) which apply conventional silica gel wheel. Waste heat from refrigeration process is used as a reactivation source of desiccant wheel of ZCB-R series desiccant dehumidifier, , resulting in an extremely energy efficient system.